Technical Specifications of Multi-Split Systems
Modular Versions (Componibili): Available from 15,000, 19,000, 21,000, 27,000, 28,000, 36,000, up to 42,000 BTU/h, with the ability to connect from 2 to 5 indoor units.

Outdoor Unit Power: From 4.1 kW to 12.2 kW, supporting 2 to 5 indoor units..

Wall-Mounted Indoor Units: Versions compatible and interchangeable with mono-split models.

Indoor Unit Types: Available in console, floor/ceiling, cassette, and ducted (false ceiling) versions.

Refrigerant Circuit: Uses eco-friendly R32 gas with a low environmental footprint.

Operating Range: Outdoor temperatures from -15°C to +60°C.

Outdoor Unit Fan: Equipped with a DC Inverter motor to optimize operation and reduce noise.

Blade Design: Optimized shape of the outdoor unit fan blades to minimize noise and vibrations.

Evaporator Element: Specially shaped to increase the heat exchange surface area while reducing overall dimensions.

Heat Exchanger: Constructed from copper tubes with internal grooving, increasing exchange efficiency by up to 50% compared to traditional exchangers.

Preheating Function: Prevents the circulation of cold air into the room. The indoor unit fan activates at minimum speed only when the exchanger temperature exceeds 28°C, then gradually increases.

Sleep Mode: Ensures comfortable and quiet operation by ideally adjusting the temperature during the night.

Smart Defrost Function: Microprocessor-managed defrosting phase to optimize heating performance.

Differentiated Louver Angle: Optimized airflow direction based on the mode (heating or cooling) for better distribution (not applicable to ducted units).

Automatic Louver Reset: Upon restarting, the horizontal deflector returns to the same position it was in before being turned off.

MultiBonAir: Capability to operate in cooling mode even at low outdoor temperatures.

Wi-Fi Control: Optional (excluding console models).